Customization: | Available |
---|---|
Feature: | High Toughness |
CAS No.: | 9003-56-9 |
Still deciding? Get samples of $ !
Request Sample
|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Performance Item | Test Conditions | Test Method | Test Data | Data Unit |
Specific gravity | --- | ASTM D-792 | 1.05 | 23/23ºC |
Melt flow rate | 200ºC×5kg | ASTM D-1238 | 8.5 | g/10min |
Melt flow rate | 220ºC×10kg | ASTM D-1238 | 75 | g/10min |
Tensile strength | --- | ASTM D-638 | 400 | kg/cm2 |
Tensile strength | --- | ASTM D-638 | 5670 | lb/in2 |
Elongation | --- | ASTM D-638 | 10 | % |
Flexural modulus | --- | ASTM D-790 | 2.3×104 | kg/cm2 |
Flexural modulus | --- | ASTM D-790 | 3.2×105 | lb/in2 |
Flexural strength | --- | ASTM D-790 | 640 | kg/cm2 |
Flexural strength | --- | ASTM D-790 | 9070 | lb/in2 |
Rockwell hardness | --- | ASTM D-785 | 115 | R |
IZOD impact strength | 200ºC×5kg | ASTM D-256 | 10 | kg.cm/cm |
IZOD impact strength | 1/8" | ASTM D-256 | 1.9 | ft.lb/in |
IZOD impact strength | 1/4" | ASTM D-256 | 8 | kg.cm/cm |
IZOD impact strength | 1/4" | ASTM D-256 | 1.5 | ft.lb/in |
Vicat softening point | --- | ASTM D-1525 | 105 | ºC |
Vicat softening point | --- | ASTM D-1525 | 221 | ºC |
Heat deformation temperature | --- | ASTM D-648 | 99(210) | ºC |
Heat deformation temperature | --- | ASTM D-648 | 89(192) | ºC |
Flammability | File No. E56070 UL&C-UL | --- | 1/16"HB | --- |
Julier has been one of the leading forces within the plastic materials industry since it was founded in 2003.We specialize in manufacturing and exporting high-quality plastic products, including but not limited to:
General plastics: PP, LDPE, HDPE, PVC (polyvinyl chloride), PS (polystyrene),HIPS which can be reinforced with glass fiber reinforced, flame retardant, carbon fiber, Mos2, toughness, etc.
Engineering plastics: PA6, PA66, POM (polyoxymethylene), PC, ABS, PBT, which can be reinforced with glass fiber reinforced, flame retardant, carbon fiber, Mos2, toughness, etc.
High-performance engineering plastics: PEEK (polyetheretherketone), PEI (polyetherimide), PPS (polyphenylene sulfide), PSU (polysulfone), PPSU (polyphenylene sulfone),PPA
Thermoplastic elastomer (TPE):TPU, TPV, TPR, TPE